Previous
Next
6-inch-150lb API standard wafer butterfly valve
Model: D73F-150LB
Origin: Oubei, Wenzhou
Type: Wafer Type
Specification: 6 inches
Material: c95800
Valve Body Material: c95800
Valve Disc material: c95800
Valve Stem Material: Monel k400
Sealing Material: PTFE
Driving Mode: Worm Gear
product details
6-inch-150lb API standard wafer butterfly valve is used to connect the valve between the flanges of two pipes. It has the advantages of simple structure, small volume and light weight. It is composed of a few parts and materials. 6-inch-150lb API standard wafer butterfly valve is easy to operate, only need to rotate 90 ° It has two sealing forms, metal seal and elastic seal, and has good flow control characteristics,Therefore, it is widely used in all walks of life. American Standard clip on butterfly valve is suitable for liquefied petroleum gas, gas, natural gas, hot and cold air, city gas, power generation, environmental protection, chemical refining and other system engineering. It can also be used as cutting off and regulating medium in various corrosive and non corrosive pipelines.
1、 Structure introduction
For the worm gear operation of clip type nickel aluminum bronze d95800 butterfly valve, the picture shows the nickel aluminum bronze c95800 butterfly valve, which mainly uses seawater as medium
The three eccentric soft seal structure is adopted. The butterfly plate seal material is PTFE. The same material is rptfe, EPDM, NBR, etc.
Three eccentric butterfly valve features:
1. Short structure size, small volume, light weight, easy to operate
2. Using the whole shaft mechanism, the butterfly plate has high strength and large flow area
3. The unique three eccentric design reduces the friction loss of the seal and greatly prolongs the service life
2、Relevant standards of API standard butterfly valve
Design and manufacture: API 609
Structural length: API 609
Connecting flange: ASME B16.5
Inspection and pressure test: API 598,
Any valve produced by our company is pressed in strict accordance with the pressure test standard, and the zero leakage butterfly valve is allowed to leave the factory only after the pressure is qualified.
| Shell strength | Sealing strength of high pressure water | Air seal strength |
| 3 | 2.2 | 0.6 |
Under the above pressure, the zero leakage can be achieved.
Accept the sampling and full inspection of the third party quality inspection unit entrusted by the customer and the end customer, but explain to us in advance
3、Detailed connection size
| Nominal pressure | Specifications | Structural length | Drilling center distance | aperture |
| 150LB | NPS6 | 57 | 241.3 | 8-22 |
4、Material of main parts
Valve body: c95800
Butterfly plate: c95800
Stem: Monel k400
Butterfly plate seal: PTFE
Bracket: WCB
Handle material: QT450
The default bracket is WCB, and the worm gear material is QT450. Our company can also produce WCB, CF8, CF8M and other materials according to customer needs
5、About our company
Tkok Valve is a professional high quality butterfly valves manufacturers, focusing on research and development of butterfly valve series products.
The butterfly valves produced by Tkok Valve, both the valve body and valve disc all use designed casting molds by Tkok Valve company,not use the foundry molds.so no matter the wall thickness of the valve body,flange thickness and face to face dimensions,all can meet the requirement of relevant standard.
TKOK VALVE mainly produce eccentric butterfly valves,high performance butterfly valves,and also have good supply for the centerline butterfly valves and fluorine-lined butterfly valves.